Beans Diesel | BDP Overboost Kit 7.3

When a programmer or chip is used on a Power Stroke, it will increase the boost pressure causing the computer to de-fuel in an effort to bring boost pressure back down.  Sometimes it causes a check engine light, but on some trucks it will de-fuel without a code.  In several cases, we have seen a power increase on the dyno simply by adding the Over Boost Kit.  The computer will usually trip the over boost condition and give a code at 24psi and de-fuel the truck.  This regulator goes in between the MAP sensor and intake to allow the MAP sensor to see only 22psi.  The regulator is adjustable and easily installed. 

 

 

-Regulator

-Bracket

-Corbin Squeeze Clamp (4)

-1/4 barb x 1/4 MNPT (2)

-1/4 Parker Push Lock Hose (3ft)

 

 Note: The regulator come pre-set at 22psi so turning the knob will change that setting. Read the instructions if adjustments are needed.