Apex Chassis | 2007-2018 Jeep Wrangler JK 2.5 Ton Steering Kit - Steel
This is a complete replacement steering kit for your 2007-2018 Jeep Wrangler JK. It includes the tie rod (DOM steel) which is also the adjusting sleeve, and left & right forged steel tie rod ends, the drag link (DOM steel) which is also the adjusting sleeve, and left & right forged steel drag link ends. Plus 4 Ninja Lock Washers.
Depending on the options you choose above, it can be sent as an under knuckle mount (standard) or over knuckle mount (flip kit). All Flip Kits include the taper sleeve!!
Note: Taper sleeves require the knuckle drag link mount to be drilled through with a straight 7/8" drill bit.
It does not include the steering stabilizer bracket which you will need to choose in the options above based on the steering stabilizer you use.
Wheels and Spacers: If you run AEV or stock Rubicon wheels, you'll need a 1.5" spacer. This kits works with a 17" wheel with a 4.75" backspacing or less. We recommend the steering stabilizer be fitted in the stock location, or a relocation kit may be required.
FITMENT: This steering system fits stock Dana 30/44 axles. If you have done any major modifications, contact us BEFORE ordering so we can verify fitment Chat, call 866-895-3833, or email [email protected]. This will fit most modifications, but we want to make sure before shipping. You may also want to discuss with your local Jeep shop to make sure all your modifications are compatible.
If your jeep has been upgraded to a Dana 60 axle, we have modifications that can work with that as well, just contact us to order.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
This is a complete replacement steering kit for your 2007-2018 Jeep Wrangler JK. It includes the tie rod (DOM steel) which is also the adjusting sleeve, and left & right forged steel tie rod ends, the drag link (DOM steel) which is also the adjusting sleeve, and left & right forged steel drag link ends. Plus 4 Ninja Lock Washers.
Depending on the options you choose above, it can be sent as an under knuckle mount (standard) or over knuckle mount (flip kit). All Flip Kits include the taper sleeve!!
Note: Taper sleeves require the knuckle drag link mount to be drilled through with a straight 7/8" drill bit.
It does not include the steering stabilizer bracket which you will need to choose in the options above based on the steering stabilizer you use.
Wheels and Spacers: If you run AEV or stock Rubicon wheels, you'll need a 1.5" spacer. This kits works with a 17" wheel with a 4.75" backspacing or less. We recommend the steering stabilizer be fitted in the stock location, or a relocation kit may be required.
FITMENT: This steering system fits stock Dana 30/44 axles. If you have done any major modifications, contact us BEFORE ordering so we can verify fitment Chat, call 866-895-3833, or email [email protected]. This will fit most modifications, but we want to make sure before shipping. You may also want to discuss with your local Jeep shop to make sure all your modifications are compatible.
If your jeep has been upgraded to a Dana 60 axle, we have modifications that can work with that as well, just contact us to order.
